Catch zones

Film Strip CatchesAfter writing the poll, what is your bail catch?, I realized a discussion of catch zones was in order. As one hones one’s freestyle skills, one begins to realize that the disc can come in at any height, any angle, and any side of one’s body. As such, it pays to have at least one answer for every possibility.

This is where the concept of catch zones comes in – it’s a way to break down all the possibilities in order to reflect on what skills one may wish to develop.

I break down the zones as follows: ankles, knees, waist, shoulders, and head. Each of these has a right and left side, for a total of 10 zones.

So with that defined, the first step is to ask yourself, “what is your bail catch for each zone?” Here’s a worksheet to help:

Side of Body Left  Right
Ankles                                                                                                             
Knees                      
Waist                      
Chest                      
Head                      

Once the list is filled out, evaluate it with the following questions:

  1. Are there any gaps?
  2. Are these catches truly bail catches? Can you make them with both spins? Any angle?
  3. Are you satisfied with the difficulty level or your form for each catch?

For example, here is my list:

Side of Body Left Right
Ankles Chair Phlaud
Knees Under the Leg Under the Leg
Waist Behind the Back Triple Fake
Chest   Scare Crow
Head Behind the Head Scare Crow

The first thing that I notice from my list is the gap at Left-Chest. A great thing for me to practice is a catch in that zone, maybe a right handed scarecrow. Next, I notice on my right side I have more difficult catches than on my left. So, I could drill my left catches; or target one of the zones and start drilling a different specific catch. For example, a left handed phlaud for the left ankle zone. Lastly, I my Knee Zone catch on both sides could be improved with more difficult catches, like a flamingo.

This “zones” exercise can be useful for more than just catches. For example, takes, sets, air brushes, against the spin, UD, really any category of tricks can be examined in this way.

What zone do you plan to work on next?

The Crank – Part 2 – Against the Spin – Left Hand Clock Spin

In this video, I demonstrate how to perform an against-the-spin crank with the left hand and clock spin. Of course, for counter spin, just mirror the same movement using the right hand.

Check this video for the basics of the crank and this video for the basics of against the spin. Okay, now that you’ve mastered those tricks, let’s dive into the against-the-spin crank.

Doing this trick with clock spin is the same body motion as doing a with-the-spin crank with counter spin. Likewise, doing this with counter on the right hand is the same body motion as doing a with-the-spin crank with clock spin.

Before trying the full movement, here’s a practice technique: Give yourself a steep back hand throw, about shoulder height. Reach out with your left hand, palm facing towards your back. Hook the rim with your nail. As the disc falls, drop your arm and slowly decelerate the disc. Then, when the hand reaches toward the bottom, turn your wrist inwards and pull the disc up. Accelerate the pull of the disc and propel the disc into the air. Do this until you are comfortable with the motion.

Now it’s time to attempt the trick. Start with the disc on a nail delay on your left hand. Lift it up push your nail forward to tip the nose away from you. The goal is to give yourself a similar disc angle to the practice throw you did above. As the disc reaches that angle, turn your hand over and let gravity pull the disc down. Allow the disc to accelerate and, when it has enough speed, decelerate and pull your wrist inwards, using the rim (if needed) to crank the disc through.

A couple notes: First, I seldom use the rim. Instead, my nail is about halfway between center and the rim. One cool thing about this is the that disc makes a large gyration as it goes against-the-spin. However, this took many attempts to master; in the beginning I was using much more of the rim. The second note is that it’s possible to do this trick 100% in the center. The disc mechanics (when doing this trick totally in the center) change a lot as it becomes about mastery of the center delay in all hand positions. I highly recommend practicing this as well. Lastly, as you improve, a good exercise is to do as many cranks as you can from a self throw. If you can get to 4 successful cranks, you have mastered this trick.

Matt Teaches the Flamingitosis Catch

The flamingitosis is one of the most challenging catches. To understand it, it helps to break down the name; Flamingo – Gitis – Osis. A flamingo is when one plants on one leg and catches the disc behind the planted leg. A gitis is a variation of under the leg where the disc is caught around the outside of the leg opposite the catching hand. So right hand catches on the outside of the left leg and vice versa. So, a flamingosis is catching around the outside of the planted leg with the opposite hand. An osis is when one spins away from the catch so body rotation moves the hand in the direction as the disc is flying. Check the links for more details on each. Now put it all together and you have a flamingitosis.

Of course Matt, being the incredible jammer that he is, decided to add a double spin before he caught it. This is not a requirement. To fully understand the body mechanics involved, watch the video. There’s even a nice slow motion section. After Matt’s second spin you can see how he looks over his catching shoulder for as long as he can before his body blocks the view. Watching the disc as long as possible is the key to making this catch.

Another thing I find helpful is falling into the catch. The fall is not required, but for me it opens the window just a little more. You can see in the video, it works for Matt as well.

Matt Gauthier Teaches the Flamingosis Catch

Matt Gauthier teaches us about the famingosis catch. This is one of the more challenging catches to master. Also, it has a intriguing look due to the unique body rotation involved.

First, some nomenclature. The basic osis catch is covered here. It involves catching behind the back as one spins away from the disc. A similar spinning away movement can be applied to almost any catch. In this example, Matt is showing us the flamingosis, which is a flamingo with the osis style rotation. There is also gitosis, chosis (chair osis), bad attitosis, and probably a whole host of others. So, take your favorite catch and try to add an osis to it. It can open a whole new world.

Now for the flamingosis. Set the disc up and then spin. If you spin to the left, as Matt demonstrates, then plant on your right foot, kick your left foot out, and reach behind your right leg with your right hand and make the catch. As you spin, watch over your right should as long as you can, then flip your head around quickly and watch the disc into your hand over the left shoulder. Matt points out that the motion is very similar to a phlard. So, one way to begin is by catching a pharld but move your hand to the other side of your leg. This will help you with the motion.

There are also some subtle variations here. For example, the raised leg could travel over the disc before the catch is made. Or, it could move into position before the disc is low enough for the leg to go over. Or it could never go past the disc flight path at all. All are valid but it changes the aesthetic. My guess is that, with a little creativity there are other possible variations as well. If you think of any, please share in the comments below.

 

Ryan Young Explains How To Make Your Gitis Look Great

Ryan Young explains how to improve the look of a leaping gitis. Many people learn the leaping gitis without considering form. In fact, that’s my style…for me it’s traditionally about making the catch, with no thought to it looks. As a result, I look all compact and hunched over.

Ryan takes his gitis to another level by focusing on the form. Basically, as I understand it, the goal is to keep the knees straight, point the toes and kick the back leg backwards as you leap. This creates straight lines and splayed out look that is pleasing to the eye. I am certain Ryan learned this leap in ballet and has translated it into the gitis catch. In the video, Ryan goes over warmup and how to practice the form, even before trying to make the catch. Thanks to Ryan’s inspiration, you may see me trying to improve my form.

Ryan Young Teaches How To Cuff to Flatten the Disc During a Brush Run

Ryan Young demonstrates how to cuff the disc to flatten it while on a brushing run. Often times, especially when in high speed wind, the disc will become too steep during a brushing run. This can cause the pace of the run to suddenly change, which creates break in the flow of the jam. It also can cause a loss of control as you run into or past the disc. In more severe wind, the disc can blow behind you and roll away. By using the skill Ryan is demonstrating you can maintain control and even avoid any break in the flow of the jam.

OK, so let’s break it down. There are three steps; brush to add spin, cuff to flatten, and brush to continue the run.

Let’s say you’re on a run and the disc becomes to steep. On challenge may be that it is spinning quite slowly. Of course, cuffs use a lot of spin. So, Ryan suggests first doing a quick brush to add spin. This is step one. I often do this before a cuff as well and not just for this circumstance. With practice, the brush-to-cuff becomes a single move instead of two. The key to success here is to change the height of the disc as little as possible. Think “stun it”.

Now it’s time to cuff it flat. With clock spin, touch it lightly at 3 o’clock with the back of your hand. With counter, touch it at 9 o’clock. If your hand is wet, all the better…the wetness reduces friction. However, this is not required. As you touch, slowly lift and left the disc glide. As you lift your hand the disc will flatten out. Ryan suggests slowly moving your hand towards 6 o’clock. Just remember, soft touch and let the disc glide.

Once the disc is at the desired angle, it’s time to brush it again and continue the run. Exactly which brush you use will depend the situation after the cuff. But, as Ryan suggests, this brush must happen quickly. The key here is to use this brush to maintain/regain control. It’s not about adding spin or perfect placement. Just get it back into the air where you can deal with it. And, be ready to brush with either hand, especially in a strong wind, because the disc could now be quite high in the air. Or, in lower wind it might be falling really fast so even a kick brush or kick tip may be in order. Ryan suggests trying to connect the cuff to the next brush. This is a great suggestion as the cuff-to-brush will eventually become a single move. My latest adaptation is to let the cuff turn into a guide so I can, with a single contact, flatten the disc and then push it forward gently to give myself enough time for next trick…no third brush required. 

This brush–cuff-brush skill, though not sexy, will greatly enhance your ability to maintain control over disc that’s become too steep and is starting to get away. We’d love to hear your strategies for maintaining disc control. Let us know in the comments.

Jake Demonstrates Eating Crow

Eating Crow is a third world scarecrow. First, place the disc upside down in your mouth. Bite down on it so the rim is just behind your canine teeth. Bend forward and then toss your head back, throwing the disc up with a third world spin. As it spins count the rotations to get the timing. Now, catch a scarecrow. Time the catch with the disc rotation so the it is flat when your hand arrives.

Once you perfect this trick, then next question, what trick leads up to having the disc in your mouth. If you have an idea, let me know in the comments.

 

The Hitch Turnover

Paul Kenny explains how to do one of his signature tricks, the hitch turnover. Most turnovers involve some sort of against the spin push. The push is what causes the disc to gyrate and turn over. So for a clock spinning disc, a whip over is done from left to right. The hitch turn over is different. It looks similar to a whip over. However its clock and goes from right to left. Somehow, with a little hitch maneuver Paul can turn it over in the opposite direction than what is seemingly possible. Even after filming the video and asking him questions afterwards I still do not fully understand it. I love tricks that boggle my mind. So, watch the video and explain in the comments how it works. Or ask questions and I’ll try to get Paul to answer.

The Precession

Paul Kenny teaches one of his tricks called the Precession. This trick requires two discs. It is almost like an endless cuff, where one disc is cuffing the other in an endless precession. The disc on top slides on it’s rim and rotates around and around.

To perform this trick, hold one disc with a backhand grip. Throw the other on with lots of spin at about a 45 degree angle. Then let is softly land its rim on top of the disc being held. Now rotate the held disc in the opposite direction of the spinning disc. The spinning disc will rotate it’s nose opposite of its spin direction. Keep the held disc at the lowest point of the spinning disc to keep control.

Then, you have options. Pushing upwards at the right moment can cause the spinning disc to turn over. Stopping the rotation can cause the spinning disc to grip the held disc and roll off into a chest roll or other trick. And, I’m sure there is much more to be created here since this is a new and unique trick. So go invent something cool and post about it in the comments.